Fully Automatic Disposable Face Mask Production Line

We do not make masks, we only make machines for making masks.

At the end of last year, a case of coronavirus was found in Wuhan, China. In just over a month, the virus has spread to every city in China. My family and friends have experienced this virus epidemic. The Chinese government has adopted very strong isolation measures, and China, which has a population of 1.5 billion, is almost quiet. There is no flow of people in every street, every restaurant is closed behind closed doors, every shopping mall is closed. And we, each Chinese, can only be isolated at home. The virus is now known as Coronavirus. If we want to go out, we must wear a medical face mask or a surgical face mask.

But masks can hardly be bought. All the masks have been sold. Not only that but also raw materials such as non-woven fabrics for making masks were not ordered. The production of masks is also in short supply.

Ten days of lead time.
As a company that produces face mask making machines, during the epidemic, we researched and developed the latest T-M1 automatic mask production line. Once launched, supply exceeds demand. However, customers are demanding shorter delivery periods, and some customers require spot transactions. Recently, we have increased its horsepower, and the fastest delivery time is 10 days.

T-M1 Automatic Face Mask Production Line Introduction

T-M1 series full-automatic mask production line is our latest product, with fine workmanship, stable performance and high production efficiency.

The disposable mask production line adopts a “one drag two” design, that is, a mask forming machine, two ear band welding machines (outer ear bands) are connected through a one-to-two transmission line.

T-M1 can realize the full-automatic production process from coil feeding, folding and pressing, and slitting, ear band feeding, welding, and unloading.

T-M1 can produce disposable masks with a size of 175 * 95mm (adult). The daily production capacity is 150000-170000 (24h).

Equipment size Exterior color equipment weight Equipment capacity rated power Rate of qualified products Equipment failure rate
5500*3500*1600mm International standard off-white 《3000kg 6000-7200pcs/h 10kw 99% <2%

Mask Forming Machine Introduction

The T-M1“ one-to-two”full-automatic flat mask making machine production line adopts advanced design. It only needs to place the production of raw materials on the feeding rack. After the modulation is completed, the machine can realize automatic production. Only one person needs to operate the packaging, which fully realizes the entire automated production.

Ultrasonic welding, beautiful style, hygienic and environmental protection.

Operating environment: temperature 10-50 ℃, humidity 5-50%, non-flammable, corrosive gas.

Mask forming machine output

The T-M1 medical face mask making Machine‘s output is 110-160 pieces per minute, the length of the bridge of the nose bridge is adjustable, and the product size error is ± 1mm.

According to demand, some molds can be replaced to realize a variety of mask sheets.
T-M1 can manufacture kinds of non-woven face mask: Cloth masks, gauze masks, activated carbon masks, double nose line masks, etc.
Supporting 1-4 layers of non-woven mask sheet production.

Mask forming machine technical parameters

Equipment size Voltage Productivity Sub-power
3345*630*1830 AC 220V;50-60Hz 110-160Pcs/mins 2.7KW

Ear band welding machine introduction

This equipment adopts an ultrasonic welding process. The elastic bands are fused on the inside of the two ends of the mask body.

It is the last processing step of the production of ear band masks. Only one operator needs to place the mask body piece by piece in the mask plate.

To the finished product is completed automatically by the equipment.

This machine adopts servo, step drive, precise transmission, and adjustable speed.

This equipment adopts ultrasonic welding process. The elastic bands are fused on the inside of the two ends of the mask body.

It is the last processing step of the production of earband masks. Only one operator needs to place the mask body piece by piece in the mask plate.

To the finished product is completed automatically by the equipment.

Earband welding machine technical parameters

equipment size voltage Productivity Sub-power
1915*855*1780mm AC 220V;50-60Hz 50-60 PCS/mins 2.7Kw

Workshop requirements

Workshop standards Ground load Power Compressed air Workshop environment
Class 100,000 dust-free purification 《500KG/m2 220v AV±5%,50HZ 0.5-0.7Mpa, 300L/min Temperature 10 ~ 50 ℃, humidity 5-50%, non-flammable, corrosive gas

Raw materials for manufacturing surgical face mask

1. Two layers of PP non-woven composite fiber (about 30g)

2. The middle layer is meltblown cloth (about 25g)

3. Nose bridge strip PP3 mm

4. Earband is round with a diameter of 2.5-3mm

Specifications of production materials

Item Number of hanging shafts Width(mm) Coil outer diameter Inner diameter of barrel weight
Cloth 3 170-200 600 76 Max 30kg
Bridge of nose 1 3-7 400 76 Max 30Kg
Earband 4 3 —- —-—-

After-sales service

  1. After the installation and commissioning of the equipment is completed, technical handover and operation and maintenance training for production personnel and equipment maintenance personnel are conducted, and the equipment can be operated and used only after qualified training.
  2. The equipment maintenance period is 12 months from the date of equipment delivery
  3. Paid repairs and maintenance after the warranty period expires
  4. Response time for repair: 2 hours, repair time: 7 working days
  5. Problem resolution time: 48 hours (working day)

Get the Quotation

info@themaskmachine.com